11.0.168 - 2015-05-25
Option "trace" "gammacorrectedweight" [1]"
11.0.167 - 2015-05-21
11.0.166 - 2015-05-13
Modified the way rays' importance acts on the total number of traced rays: it is now more conservative to take into consideration screen's gamma curve, this means noise in dark areas will be consistent with noise in bright areas.
It is necessary to lower the number of samples in materials and/or in the Render Settings for Indirect Illumination to regain performance. |
11.0.165 - 2015-05-08
[float|color] stringhash(string)"
shadeop which takes a string and returns a corresponding float or color hash. This function can be used to output (as AOVs) color-coded object identifiers (or material identifiers) for further masking and compositing. 11.0.164 - 2015-05-06
11.0.163 - 2015-04-30
11.0.162 - 2015-04-29
11.0.161 - 2015-04-27
11.0.160 - 2015-04-22
11.0.159 - 2015-04-20
11.0.158 - 2015-04-16
11.0.157 - 2015-04-08
11.0.156 - 2015-04-06
11.0.155 - 2015-03-31
11.0.154 - 2015-03-29
Attribute "light" "integer normalize" [ n ]
to enable area light intensity normalization by area.11.0.153 - 2015-03-27
11.0.152 - 2015-03-25
11.0.151 - 2015-03-25
11.0.149 - 2015-03-20
11.0.148 - 2015-03-12
11.0.147 - 2015-03-03
11.0.146 - 2015-02-27
11.0.145 - 2015-02-25
11.0.144 - 2015-02-24
11.0.143 - 2015-02-23
11.0.142 - 2015-02-19
11.0.141 - 2015-02-17
11.0.140 - 2015-02-11
11.0.139 - 2015-02-06
11.0.138 - 2015-02-05
11.0.137 - 2015-02-01
.json
extension for the statistics filename.11.0.136 - 2015-01-24
11.0.135 - 2015-01-22
subsurface()
shadeop can now output the contribution of single scattering only (using the "singlescattercontribution" output variable) (#5638).followtopology
' parameter to ray traced subsurface()
now works. Highly scattering and curved surfaces might see an improvement in quality with this parameter enabled. The drawback is much significantly higher noise levels in the subsurface effect.11.0.134 - 2015-01-19
-D
option of renderdl
is not available anymore.-id
option of renderdl
now tries to output all the cameras that are used in a multi-camera render (#1494).11.0.133 - 2015-01-15
11.0.132 - 2015-01-14
11.0.131 - 2015-01-10
11.0.129 - 2015-01-06
11.0.128 - 2014-12-29
11.0.127 - 2014-12-17
ribdepends
now recognizes UDIM textures.11.0.126 - 2014-12-15
rendermn.ini
file to disable the clamping:/display/exr/aovnamelimit 0
11.0.125 - 2014-12-03
11.0.124 - 2014-12-01
11.0.123 - 2014-11-27
11.0.122 - 2014-11-23
/display/exr/autocrop
boolean from the rendermn.ini
file.11.0.121 - 2014-11-15
11.0.120 - 2014-11-14
11.0.119 - 2014-11-12
11.0.118 - 2014-11-07
11.0.117 - 2014-11-02
11.0.116 - 2014-10-30
11.0.115 - 2014-10-22
11.0.114 - 2014-10-16
11.0.113 - 2014-10-10
11.0.112 - 2014-10-07
11.0.111 - 2014-10-02
11.0.110 - 2014-10-01
Progressive rendering is now almost as fast as a normal, non-progressive, render. As a broad estimate, the progressive render has less than a 10% speed penalty compared to a normal render.
Scene edits (IPR) appear delayed in this version, do not update to this version if IPR is needed. |
11.0.109 - 2014-09-30
11.0.108 - 2014-09-24
11.0.107 - 2014-09-18
11.0.106 - 2014-09-17
11.0.105 - 2014-09-11
11.0.104 - 2014-09-04
11.0.103 - 2014-08-30
11.0.102 - 2014-08-25
11.0.101 - 2014-08-20
11.0.100 - 2014-08-19
shaderdl
now accepts only the correct extensions when looking for a RslPlugin (#5515).11.0.99 - 2014-08-14
11.0.98 - 2014-08-09
11.0.97 - 2014-08-05
11.0.96 - 2014-08-04
RiScopedCoordinateSystem
() which were not working.11.0.95 - 2014-08-01
11.0.94 - 2014-07-31
11.0.93 - 2014-07-30
11.0.92 - 2014-07-27
11.0.91 - 2014-07-26
11.0.90 - 2014-07-21
11.0.89 - 2014-07-18
11.0.88 - 2014-07-15
11.0.87 - 2014-07-11
11.0.86 - 2014-07-10
Adding "string namesuffix" parameter to RiDisplay. This is used to properly output light category names to exr display driver.
11.0.85 - 2014-07-07
11.0.84 - 2014-07-02
11.0.83 - 2014-06-26
11.0.82 - 2014-06-24
textureinfo()
now accepts "pixelaspectratio" parameter.11.0.81 - 2014-06-20
11.0.80 - 2014-06-17
11.0.79 - 2014-06-18
11.0.78 - 2014-06-12
11.0.77 - 2014-06-05
11.0.76 - 2014-06-04
11.0.75 - 2014-05-26
11.0.74 - 2014-05-22
11.0.73 - 2014-05-21
11.0.72 - 2014-05-16
11.0.71 - 2014-05-13
11.0.70 - 2014-05-12
11.0.69 - 2014-05-08
11.0.68 - 2014-05-07
11.0.67 - 2014-05-01
11.0.66 - 2014-04-30
11.0.65 - 2014-04-28
11.0.64 - 2014-04-24
11.0.63 - 2014-04-23
11.0.62 - 2014-04-17
11.0.61 - 2014-04-14
11.0.60 - 2014-04-11
11.0.59 - 2014-04-09
11.0.58 - 2014-04-08
11.0.57 - 2014-03-31
11.0.56 - 2014-03-31
11.0.55 - 2014-03-28
11.0.54 - 2014-03-27
11.0.53 - 2014-03-25
11.0.52 - 2014-03-21
11.0.51 - 2014-03-18
11.0.50 - 2014-03-15
11.0.49 - 2014-03-12
11.0.47 - 2014-03-09
11.0.46 - 2014-03-06
11.0.45 - 2014-03-04
11.0.44 - 2014-02-27
i-display: Now saves the current Color Profile so re-opening the software doesn't reset the profile to "none" (#4864).
11.0.43 - 2014-02-21
11.0.42 - 2014-02-20
11.0.41 - 2014-02-19
11.0.40 - 2014-02-18
11.0.39 - 2014-02-13
11.0.38 - 2014-02-11
Added the ability for RiDisplay to fetch user attributes directly. Example:
Display "output_attribute.tif" "tiff" "color attribute:user:colorattrib" |
11.0.37 - 2014-02-07
11.0.36 - 2014-02-05
11.0.35 - 2014-02-05
11.0.34 - 2014-02-04
11.0.33 - 2014-01-31
11.0.32 - 2014-01-27
11.0.31 - 2014-01-24
11.0.30 - 2014-01-23
11.0.29 - 2014-01-20
11.0.28 - 2014-01-17
11.0.27 - 2014-01-15
11.0.26 - 2014-01-09
11.0.25 - 2014-01-08
11.0.24 - 2014-01-06
11.0.23 - 2014-01-03
11.0.22 - 2013-12-17
11.0.21 - 2013-12-13
11.0.20 - 2013-12-10
11.0.19 - 2013-12-04
11.0.18 - 2013-11-29
11.0.17 - 2013-11-27
11.0.16 - 2013-11-23
11.0.15 - 2013-11-22
11.0.14 - 2013-11-20
11.0.13 - 2013-11-18
11.0.12 - 2013-11-15
11.0.11 - 2013-11-11
11.0.10 - 2013-11-07
11.0.9 - 2013-10-30
11.0.8 - 2013-10-28
11.0.7 - 2013-10-24
11.0.6 - 2013-10-22
11.0.5 - 2013-10-11
11.0.4 - 2013-10-09
11.0.3 - 2013-10-06
Mouse Buttons | Actions | Previous Actions |
---|---|---|
Middle Mouse Button | Image browsing. With SHIFT modifier: Fast image browsing (for playback scrubbing). | Image Panning. With SHIFT modifier: Zooming. |
Left Mouse Button | Image Panning. With SHIFT modifier: Zooming. With COMMAND modifier: Define Zooming region. | Fast image browsing (for playback scrubbing). With SHIFT modifier: Image browsing. |
11.0.2
11.0.1 - 2013-10-01
11.0.0 - 2013-09-28